Freightliner Sprinter Seat Covers

Change Vehicle

Freightliner Sprinter Seat Covers

A Freightliner Sprinter doesn't sit still much. Routes, stops, job sites, deliveries, and the seat take it all every single working day. By the time the driver's bolster is cracking or the cushion has flattened out, it's usually been going downhill for months. A quick surface fix won't get the seat back to where it actually needs to be.

Freightliner Sprinter Seat Covers And Foam Cushions

How Sprinter Seats Wear Under Commercial Use

If you've driven a Sprinter for work, you already know the seat doesn't hold up the same way a truck seat does. The use pattern is harder, and the wear follows a pretty predictable path.

The Bolster Cracks Before Anything Else

Getting in and out of a Sprinter 30, 40, or 50 times a day grinds the bolster down fast. Work boots, tool belts, denim: every entry drags something abrasive across that outer edge of the seat bottom. Vinyl cracks there first. Stitching splits at that edge before the rest of the seat shows anything. You might not notice it until the crack is an inch wide, but by then it's been spreading for a few months already. If you look at where the driver puts their weight on entry every time, that bolster edge is always the first thing to go. The center of the seat cushion can still look totally fine, even if the bolster is already done.

Long Days Flatten The Foam

A Sprinter doing commercial runs puts serious hours on that driver's seat. Long stretches behind the wheel, stopping and starting all day in the heat, sitting in direct sun between stops: all of that compresses the foam underneath the cover faster than normal use ever would. Once the foam loses its density, you start feeling the frame through the seat, your posture shifts to compensate, and the aches on long routes get worse. Freightliner Sprinter van seat covers on the surface don't fix that. The foam has to be replaced.

What We Carry For The Freightliner Sprinter

We carry a specific Durofoam cushion for the 2007-2018 Sprinter, as well as OEM-matched seat covers, through our commercial van lineup. Here's what's available and what it does.

Sprinter Durofoam Bottom Cushion For 2007-2018 Models

Our Sprinter Durofoam Bottom Cushion replaces the front-row driver-side bucket seat foam in single-seat configurations. It directly replaces OEM part numbers 0009141300 and 0009141400 for Mercedes and Freightliner Sprinter, and 68010848AB and 68010848AA for Dodge Sprinter. We match the factory specs and then increase the density beyond OEM levels, so the foam is firmer and lasts longer under real commercial use. It goes in using the same attachment methods as the original, has a reinforced backing underneath to keep the seat frame from cutting into the cushion over time, and works with factory-heated seats. Your OEM heater transfers directly with no modifications needed.

Econoline Seat Covers For Commercial Van Operators

For Freightliner Sprinter seat cover replacement on the surface, our Econoline Seat Covers are the closest OEM-matched commercial van seat cover in our lineup. The Econoline E-Series runs the same kind of routes and puts the same kind of wear on a seat as a Sprinter does. We build those covers in leather, vinyl, and cloth from OEM suppliers and hand-sew them in Texas to the same construction standard we use across everything we make. If your fleet runs both Sprinters and Ford E-Series vans, we have the Ford side covered right now.

Why Factory-Match Quality Is The Right Standard For Commercial Vans

When a work van seat starts to go, most operators grab the cheapest fix they can find. That's understandable. But on a vehicle that runs every day, cheap fixes show up fast.

What Happens With A Generic Slip-On

A universal cover is designed to fit many different seats loosely. On a Sprinter getting dozens of entries a day, that loose fit becomes a problem fast. It shifts at the bolster, bunches at contact points, and the friction between the moving cover and the surface below it accelerates the damage beneath. Sprinter van seat covers sold as one-size-fits-all might look fine when they first go on, but they don't make it through a full commercial season without becoming more of a problem than the worn seat they were covering. That's the feedback we hear from operators who tried it before they found us.

What A Proper Replacement Actually Looks Like

Our commercial van covers are built from OEM-sourced leather, vinyl, and cloth sourced from the same supply chain used by the original manufacturers. Color and grain are matched against the original before production starts, so the cover reads as original when it goes on. Every panel is digitally cut and hand-sewn in Plano, Texas. Any airbag-equipped cover we produce is deployment-tested at a certified facility before it ships. We back every cover and every Durofoam cushion with a two-year warranty because we stand behind what we build, and if something's wrong, we take care of it.

What To Confirm Before Ordering

Getting the right Freightliner Sprinter van seat covers or Durofoam cushion starts with knowing your van's exact setup. Sprinter configurations changed across years and badge variants, and the wrong details mean the wrong part.

Get these confirmed before you order, and the rest is easy.

  • Confirm Your Year: The Sprinter Durofoam cushion fits 2007-2018 models. Make sure your van falls in that range before ordering.
  • Confirm Your Seat Style: This cushion fits the front-row driver-side bucket or single-seat configuration. Verify that's what your van has.
  • Check Your Badge Variant: The Sprinter was sold under the Freightliner, Mercedes, and Dodge badges. The listed OEM part numbers cover all three for this year's range.
  • Note Heated Seat Functions: If you've got factory heated seats, the OEM heater transfers directly to the new Durofoam cushion with no changes needed.
  • Submit A Seat Cover Request: We don't currently offer seat covers for the Sprinter. Use our Can't Find Your Vehicle page to put your van on our R&D team's radar.

Get these confirmed, and ordering is straightforward from there.

Your Sprinter works hard, and your seat should hold up just as well. At The Seat Shop, we build OEM-matched Durofoam cushions for the 2007-2018 Freightliner Sprinter and factory-matched seat covers for commercial vans, hand-sewn in Texas and backed by a two-year warranty. Find your configuration and get your van's interior back where it belongs. Browse our full seat covers catalog to see the commercial and work vehicle range we support.

Can I use the Install Locator to find someone to install my van seat products?

Yes. Our Install Locator connects you with qualified local professionals who can handle the install.

Does The Seat Shop have a wholesale program for upholstery shops and installers?

Yes. We have a wholesale partner program for upholstery shops. Fill out the Wholesale Application on our site, and we will follow up with details.

Can I order just a single seat cover rather than a full set?

Yes. We sell covers by individual seat position, so you can order only the position that needs replacing.

Is there a return or exchange option if the product does not work for my van?

Yes. If you are not satisfied for any reason, you can return the product. Contact us, and we'll handle it.

Does The Seat Shop manufacture replacements for vehicles built before 1994?

No. Our catalog covers vehicles from 1994 onward. We do not manufacture replacements for earlier model years.

Can I convert my commercial van seats from cloth to leather?

In some cases, yes. Seat styles can differ between cloth and leather trims. Contact us first to confirm.