2013-2016 Dodge Ram Laramie 1500 - Driver Side Bottom Seat Cover - Light Frost Beige Leather/Vinyl with Perforated Inserts

Received the new drivers seat cushion cover and inspected it immediately. The construction, materials and quality are as the manufacturing stated, excellent and as expected. I removed the old, worn and torn seat cover. [Note: Instead of removing the entire seat from the vehicle, I removed the seat cover in situ. The only 2 difficult and tedious areas were removing the one screw where the seat cover is attached to the seat where it’s next to the center console. The seat only slides back so far and is difficult fitting a Philips head screw driver so I used a small ratchet fitted with a Philips head bit…it finally worked. The other area was reinstalling the connecting straps of the cushion seat to the frame, once again next to the center console.]

Reinstalling the new seat cover was pretty easy and using the purchased Hog Ring Pliers (Hog Rings Included), made the task a breeze. Once all hog rings installed, the cover wrapped around the seat cushion with ease. [Note: My seat has the cool seat option as well as heat so the cool seat component is attached to the seat cushion so the connecting clips need to be disconnected from the seat and slowly fed thru the seat while removing the cushion. Take your time doing this step. Installation is the reverse, no need to hurry.]

Once the new cover is on the cushion, the reinstalling is reverse from disassembly. I took pictures so I knew where the connectors connected to and how the straps were to be reinstalled.

The entire project took about 3 hours, mainly because of the disconnecting of anything on the side of the center console.

Great product, color match is spot on and I expect to get another 10 years out of this seat cover.